Description

TM400 Log Splitter

OVERVIEW

The TM400 range of log splitters is suitable for most tractors. The splitter fits to a standard rear three-point linkage tractor and only requires a hydraulic power supply and a free flow return.

Oxdale has been manufacturing the TM range for 12 years and now have over 10,000 units working throughout the UK and Europe.

The beauty of this log splitter allows the user to work the machine at ground level for those larger diameter rounds, or it can be raised to a comfortable waist height for those easier to handle logs.

The unique axe head allows a 10-ton capacity ram to be fitted which makes the splitting operation very quick.

Tractor mounted hydraulic log splitter which runs off the tractor’s hydraulics.

Features

The TM400 range of log splitters is suitable for most tractors. The splitter fits to a standard rear three-point linkage tractor and only requires a hydraulic power supply and a free flow return.

10 tonne splitting force
Splits up to 45cm / 18″
14 l/m minimum oil flow needed
The splitting wedge is specially forged, hardened and has a double chamfer to give the best splitting action available on the market
Suitable for all tractors with ISO CAT 1 and CAT 2 linkages; including low HP compact tractor and large high horsepower tractors
The unit can be fitted on the front or rear three-point linkage
For added safety all the hydraulic pipes are covered in anti-burst lagging and both hands are required on the lever to operate the ram. Lifting the lever will power the splitting wedge through the logs and lowering the lever will retract the ram
Capable of splitting logs up to 18 inches high and is not limited to the width of logs it can split
20Hp minimum